Engineering Plastics Network
 (주)엔프라넷
 
Test Method ASTM, DIC-PPS, Sumitomo Chemical LCP(SUMIKASUPER LCP), polyamide(pa6,pa66), nylon, polyacetal(acetal,pom), polycarbonate(pc)
A S T M  Test Method Index Engineering Plastics Test Method

  • Ash Content    ASTM D5630, D2584, ISO 3451
  • ASTM Sample Preparation - Machining, Molding, Conditioning ASTM D3641
  • Barcol Hardness ASTM D2583
  • Brittleness Temperature of Plastics and Elastomers by Impact ASTM D746, ISO 974
  • Brookfield Viscosity(Relative Viscosity of Polyamides) ASTM D789, D4878
  • Bulk Density ASTM D1895B
  • Capillary Rheometry - Shear Sweep ASTM D3835, ISO 11443
  • Capillary Rheometry - Thermal Stability ASTM D3853, ISO 11443
  • Carbon Black Content ASTM D1603
  • Charpy Impact ISO-179
  • Chemical Compatibility ASTM D543, ISO 4599, UL
  • Chip Resistance of Coatings  ASTM D3170, SAE J400
  • CIE Lab (Color Analysis)  ASTM D6290, E1347, E308
  • Coefficient Of Friction ASTM D1894
  • Coefficient Of Friction using a Thrust Washer Tester ASTM D3702
  • Coefficient of Thermal Expansion ASTM E831, D696, ISO 11359
  • Cold Bend UL 1581-580
  • Color Analysis ASTM D6290, E1347, E308 
  • Compression Set ASTM D395
  • Compression Test ASTM D695, ISO 604
  • Contact Angle ASTM D5946
  • Deflection Temperature Under Load (HDT) ASTM D648 and ISO 75
  • Density/Specific Gravity ASTM D792, ISO 1183
  • Dielectric Constant/Dissipation Factor ASTM D150, IEC 60250
  • Dielectric Strength ASTM D149, IEC 60243
  • Differential Scanning Calorimetry (DSC) ASTM D3417, D3418, E1356, ISO 11357
  • Dimensional Stability ASTM D1204
  • Durometer Hardness (Shore) ASTM D2240
  • Dynamic Mechanical Analysis (DMA) - Torsion ASTM D4065, D4440, D5279
  • Dynatup Impact (Instrumented Impact)ASTM D3763, ISO 6603, 7765
  • Electron Microscopy - SEM
  • Elmendorf Tear ASTM D1922
  • Falling Dart Impact (Film) ASTM D1709, ISO 7765-1
  • Falling Dart Impact (Gardner) ASTM D4226, D5420, D5628
  • Flammability UL, ASTM D635, ISO 3795, 49CFR-571-302
  • Flexural Test ASTM D790 and ISO 178  
  • Fogging SAE J1756, ISO 6452, DIN 75201 
  • Fourier Transform Infrared Analysis (FTIR) ASTM E1252
  • Gardner Impact ASTM D4226, D5420, D5628
  • Gloss ASTM D523, D2457
  • Gravelometer ASTM D3170, SAE J400
  • Haze and Transmittance  ASTM D1003
  • High Speed Puncture(Dynatup) ASTM D3763, ISO 6603, 7765
  • Hunter Lab (Color Analysis)  ASTM D6290, E1347, E308
  • Index of Refraction  ASTM D542
  • Inherent Viscosity ASTM D4603
  • Intrinsic Viscosity ASTM D2857
  • Instrumented Impact (Dynatup) ASTM D3763, ISO 6603, 7765
  • Instrumented Puncture (Dynatup) ASTM D3763, ISO 6603, 7765
  • ISO Multipurpose Test Specimen  ISO 3167
  • ISO Sample Preparation - Machining, Molding, Conditioning ISO 294 / 2818 / 3167
  • Izod Impact (Notched) ASTM D256, ISO 180
  • Izod Impact (Unnotched) ASTM D4812, ISO 180
  • Lap Shear ASTM D3163, D5868
  • Melt Flow Index ASTM D1238, D3364, ISO 1133 
  • Melt Viscosity GE
  • Moisture Content by Karl Fischer ASTM D789
  • Mold Shrinkage ASTM D955, ISO 2577
  • Multiaxial Impact (Dynatup) ASTM D3763, ISO 6603, 7765
  • Notched Izod Impact ASTM D256, ISO 180
  • Oven Aging ASTM, UL
  • Oxygen Index ASTM D2863 
  • Peel Test ASTM D903, D1876, D3167 
  • Poisson's Ratio ASTM D638, ISO 527 
  • Polycarbonate Compatibility EIA 564-1992
  • Propagation Tear Resistance of Plastic Film ASTM D1922
  • Puncture Test FTMS 101C - Method 2065 
  • QUV Accelerated Weathering-ASTM D4329, D4587, ISO 4892, SAE J2020
  • Refractive Index ASTM D542
  • Relative Viscosity ASTM D2857
  • Relative Viscosity of Polyamides (Brookfield Viscosity ) ASTM D789, D4878
  • Rockwell Hardness  ASTM D785, ISO 2039
  • Sample Preparation - Machining, Molding, Conditioning
  • Scanning Electron Microscopy - SEM
  • Shear Test ASTM D732
  • Shore Hardness (Durometer) ASTM D2240
  • Short Beam Shear ASTM D2344
  • Specific Gravity/Density ASTM D792, D1045, ISO 1183
  • Specular Gloss STM D523, D2457
  • Surface Energy ASTM D5946
  • Surface Resistivity ASTM D257,IEC60093
  • Taber Abrasion ASTM D1044, D3389, D4060
  • Tear Resistance ASTM D1004
  • Tensile Impact ASTM D1822
  • Tensile Set - Rubber - ASTM D412
  • Tensile Test  Plastics - ASTM D638, ISO 527
  • Tensile Test  Plastics - Thin Sheet ASTM D882
  • Tensile Test  Plastics - Microtensile ASTM D1708
  • Tensile Test  Rubber - ASTM D412
  • Extensometers
  • Video Extensometers
  • Thermal Conductivity ASTM E1530
  • Thermal Indexing UL 746B
  • Thermal Oxidative Stability - ASTM D3012, GM9509P
  • Thermogravimetric Analysis (TGA)  - ASTM E1131, ISO 11358
  • Thrust Washer Wear and Coefficient of Friction Testing - ASTM D3702
  • UL Thermal Indexing - UL 746B
  • Ultraviolet/Visible Spectrophotometry (UV/VIS)
  • Unnotched Izod Impact  - ASTM D4812, ISO 180
  • V-Notch Shear - ASTM D5379
  • Vicat Softening Point - ASTM D1525, and ISO 306
  • Void Content - ASTM D2734
  • Volume Resistivity  - ASTM D257, IEC 60093
  • Water Absorption - 24 Hour ASTM D570
  • Water Absorption - Equilibrium  ASTM D570
  • Water Vapor Transmission ASTM E96
  • Wear Rate - Thrust Washer Testing ASTM D3702
  • Weathering - QUV ASTM D4329, D4587, ISO 4892, SAE J2020
  • Weathering - Xenon Arc (Weather-Ometer) ASTM D2565, D4459, G155, SAE J1885, J1960
  • Weight Gain/Loss Studies  ASTM D471
  • Xenon Arc Accelerated Weathering (Weather-Ometer) ASTM D2565, D4459, G155, SAE J1885, J1960
  • Yellowness Index(YI)  ASTM E313
  • HOME   |   회사소개   |   제휴안내   |   회사약도   |   회원등록 약관   |   개인정보 보호정책
    ★대표이사:문원주  (우:16074)  ※주소:경기도 의왕시 경수대로 257, 104(고천동,대영골든밸리)
    ☏℡ 031-450-6888  Fax: 031-450-6889  HP:010-8897-1580  메일: e2@enplanet.co.kr
    ※개인정보 보호기간 : 회원탈퇴시점 까지[회원가입시 주민등록번호를 받지 않습니다]
    ※http://www.enplanet.co.kr 홈페이지에 노출된 이메일의 무단 수집을 거부 합니다.